Doing The Right Way

Undergoung Utilities and their Standard Colors

If you find underground utilities, you can easily determine what type of utility it is for. The risk was high before when people could not easily identify the type of utility lines underneath whenever they dig. There is reduced risks today because of new methods of identifying utility lines although not a complete reduction. If there is a need to dig the ground, it is very important that the utility lines first be identified. If you need to dig through a piece of land today, you are required by the OSHA to first identify or locate underground utilities. It is to prevent disaster. Fatal injuries can happen if underground utility lines are struck. The location of the areas where the lines were struck can experience service interruption. Before digging their property, people should call 811 to call the utility companies so that these incidents are prevented. When the number is called, you can let the utility companies come out and mark their respective lines.

But, despite the marks, there will sill be accidents. Utility lines are struck every 6 minutes, some place. When utility lines are stuck it causes disturbances in traffic lights wastewater pipes, telecommunication lines and more. These incidents affect public health and safety.

Companies can locate utility lines through the use of GPR or Ground Penetrating Radar. This has made it easier to locate utility lies underground and other important things. Calling 811 is enough for the property owner to let companies located their lines.

There are certain colors that mark different utility lines for easy identification. Below are some of the colors used for different utility lines.

White lines are for proposed excavation sites. You can mark areas with white lines that will soon be excavated.

Pink lines are temporary survey markings. Surveyors use pink lines to mark off legal property boundaries.

Red lines are used to mark electric power lines, cable, conduit, and lighting cable. The color red is perfect for electric works because it is associated with fire and danger.

Lines for gas, oil, steam, petroleum, and gaseous materials use the color yellow. Natural gas leaks can create potentially disastrous situations and this is why it is appropriate to use the bright yellow color.

If you see orange lines, then you should associate this with communication., alarm, signal lines, cable or conduit. Blue lines are used for potable water. Reclaimed water, irrigation, and slurry lines used purple lines. Green lines are used for sewer and drain lines. A project can be derailed for a long time when these utility lines are hit.

If you want to learn more about utility lines click here now! View here for more.

Suggested Post: check here

Related posts